SNAPLON®: a patented method of mounting a Teflon cloth on the sealing jaw – why is it replacing adhesive mounting?

Replacing the Teflon (PTFE) film on the impulse strip is one of the most common maintenance tasks in sealers and packaging machines. For decades, it was performed the same way: remove the used tape, clean the profile of any adhesive residue, and precisely apply a new one. SNAPLON® – the "zip-on" PTFE cover assembly system patented by TOSS GmbH in Europe and the USA (since 2020) – replaces gluing with a mechanical "snap-on" fastening, reducing replacement time to a few seconds and ensuring consistent positioning with each replacement. PRO-TECH is the Official Distributor of the TOSS Brand in Poland.

In this article, we explain how this mechanism works, why it is innovative and how it specifically surpasses the traditional installation of a Teflon cloth with glue.

What is the Teflon cloth on the impulse strip and why does it need to be replaced?

Teflon cloth is a thin (standard 0.08 or 0.13 mm) PTFE-coated glass fabric that covers the sealing wire or tape on the jaw (bar) of an impulse sealer. It serves three functions: it prevents the film from sticking to the hot element, evens out heat distribution in the sealing zone, and protects the heating element from contamination. PTFE operates stably up to approximately +260°C, has a low coefficient of friction, and has excellent anti-adhesive properties.

However, the oilcloth is a consumable item – it wears out under the influence of heating, pressure, and friction cycles and requires regular replacement. The method of replacement determines the actual cost of maintenance. You can read more about the types of oilcloth in our guide to oilcloths and Teflon tapes.

What does the traditional installation of a Teflon cloth with glue look like – and where are its weaknesses?

In the classic solution , a Teflon cloth with an adhesive (self-adhesive layer) is glued directly to the impulse strip profile. Each replacement means:

  1. removing the used tape,
  2. cleaning the profile from glue residues (solvent, scraping),
  3. cutting a new section,
  4. precise, hand-applied without folds, bubbles and shifts,
  5. tension and position check before starting the machine.

Typical problems in this process include: imprecise tape positioning, uneven tension resulting in uneven seals, adhesive residue on the profile, assembly quality dependent on operator skill, and extended machine downtime. Any assembly error directly impacts the seal quality, and in industries such as food and medical, the integrity of the packaging.

What is the patented SNAPLON® zip-on system?

The SNAPLON® system – the PTFE zip-on cover assembly system consists of two elements:

Replacing the cover involves removing the used fabric and inserting a new one into the guides – just like fastening a zipper. No glue, no tools, no adjustments. The tape lands in the same, precise position every time, with the same tension. The solution is covered by European and American patents (since 2020), and the fabric is also available in an antistatic version (upon request). The system is the perfect complement to impulse welding systems, including those with TOSS Alloy-20heating tapes.

SNAPLON® vs. glue installation – comparison

Criterion Glue mounting (traditional)SNAPLON® "zip-on"
Replacement time Long – peeling, cleaning, gluing A few moments – snap-in
Tools and chemicals Solvent, scraper, knife None – tool-free installation
Glue residue Yes, they require profile cleaning Lack
Positioning Manual, operator dependent Repeatable, structurally forced
Tape tension Uneven, difficult to reproduce Identical at every replacement
Weld quality Variable after each replacement Constant, repeatable
Risk of operator error High Minimal – intuitive assembly
Machine downtime Extended (including glue drying) Significantly shortened

Why is this solution innovative?

The SNAPLON® innovation isn't a new material—PTFE remains the same—but a shift from adhesive to mechanical and repeatable attachment. This shifts responsibility for assembly precision from the operator to the system's design. In practice, this means:

  • Less downtime – replace the roof covering without waiting and without cleaning the profile.
  • Repeatable seal quality – crucial for validated packaging processes (e.g. food and medical).
  • Lower operating costs in the long run – fewer service hours, fewer rejects due to faulty welds.
  • Less risk of error – installation is so simple that it does not require an experienced service technician.

Which impulse strips are compatible with SNAPLON® oilcloth?

The 0.13 mm thick oilcloth works with 40 × 15 mm and 51.5 × 19 mm impulse profiles. PRO-TECH offers complete impulse strips with SNAPLON oilcloth (profiles not supplied separately). The oilcloth is supplied in rolls, with matching mounting straps included.

Frequently asked questions (FAQ)

Does SNAPLON® system require modification of the welding machine?

No. Self-adhesive mounting strips are installed once on the existing sealing beam – without interfering with the machine structure.

Does SNAPLON® oilcloth have the same properties as traditional Teflon oilcloth?

Yes. It's the same PTFE fabric (08/0/0.13 mm, operating up to approx. +260 °C) – the only difference is the method of attachment.

How long does it take to replace the oilcloth in the SNAPLON® system?

Plugging and unplugging the cover takes just a few seconds, with no tools, glue or adjustments required.

Is an antistatic version available?

Yes, SNAPLON® oilcloth is available in an antistatic version upon request.

Where to get SNAPLON® in Poland?

The SNAPLON® system and oilcloths are offered by PHUP PRO-TECH from Toruń – a custom-made product, selected for a specific packaging machine.

Summary

The patented SNAPLON® system transforms the most tedious service step of an impulse welder – replacing the Teflon cloth – into a snap-in operation in just a few seconds. It eliminates glue, profile cleaning, and assembly variability, and in return ensures repeatable positioning, constant tension, and consistent welds throughout the entire life cycle.

Not sure if SNAPLON® is right for your sealer? Contact PRO-TECH Toruń – we'll find the perfect solution for your packaging machine.