Welding wires and tapes
PTFE coated sealing and cutting tape 8.0 × 0.25 mm – 5 msection
TOSS Teflon-coated sealing and cutting tape 8.0 x 0.25 mm – a metal resistance tape with a longitudinal embossment, in a low-resistance (LR) version (Alloy 20 alloy), coated with a black PTFE coating. A single heating element seals the film on both sides and cuts it in the middle. Supplied in 5 m lengths, for impulse sealers with electronic temperature control.
Need a different size, length, or coating? Contact us – we'll select a tape for your welding machine and prepare a quote.
Price
Individual quote
Product to order — send an enquiry and we will prepare a quote.
Ask about the product
- no.
- 24070440
- Category
- Welding wires and tapes
Description
The PTFE-coated sealing and cutting tape is a heating element for impulse sealers that performs two operations in a single cycle: sealing the film and cutting it along the seal line. This version has a nominal dimension of 8.0 mm wide x 0.25 mm thick, a black PTFE coating, and is supplied in 5 m lengths under item number 24070440.
How does the sealing and cutting tape work?
A longitudinal embossment runs along the center of the tape. Below this, contact with the strip backing is reduced, so heat is dissipated more slowly, and this zone reaches a higher temperature—this is what separates the film. The flat surfaces on either side of the embossment operate at a lower temperature, creating two parallel seals. The result: a sealed package and separated film waste without a separate knife.
Advantages of tape
- welding and cutting with one element – simpler strip construction and fewer parts to service,
- low-resistance lr version made of Alloy 20 alloy – designed for electronic temperature control, which uses the change in the element's resistance during heating,
- black PTFE coating limits the adhesion of the foil to the heating element,
- According to the manufacturer, direct coating of the tape ensures efficient heat transfer, shorter heating and cooling times, and easier replacement of the element in a properly designed welding machine,
- a 5 m section allows you to prepare several items in advance.
Data from the manufacturer's label
- Brand: TOSS
- Art.-Nr.: 24070440
- Name: Sealing and cutting tape with Teflon coating
- Nominal dimensions: 8.0 mm × 0.25 mm
- Coating: PTFE, black
- Quantity: 5.00 m
Technical properties
- Cross-section and resistance – for LR 8.00 × 0.25 mmtapes, cross-section 2.000 mmand resistance 440 mΩ/m (0.44 Ω/m); calculated for a 5 m section this gives approx. 2.2 Ω. These are catalog data for the dimension group – when designing the power supply system, please confirm for index 24070440.
- Maximum operating temperature of the coating – 220 °C according to the manufacturer's catalogue; above this value the PTFE coating softens and wears out faster.
- Black PTFE coating – TOSS is available in two-layer versions (20–25 µm, with fillers improving abrasion resistance) and three-layer versions (up to 35 µm, with an outer layer of pure PTFE for greater non-stick properties but a softer surface). Please confirm the variant for this index when ordering.
- Temperature Control – The manufacturer requires electronic temperature control for coated tapes.
Installation and working conditions
This tape is designed for MULTIVAC, ULMA, GEA, OPTIMA, TOSS, and ROVEMA impulse sealers, as well as other packaging machines with a grooved impulse strip and electronic temperature control. When switching from a heating element covered with a separate PTFE tape to a directly coated element, the manufacturer recommends lowering the temperature setting – the direct coating transfers heat more efficiently, and too high a setting will damage it.
Order TOSS sealing and cutting tape at PRO-TECH Toruń
Not sure if the tape fits your strip, or if you need a different width, thickness, or length? Send us your welding machine type or a photo of your current component – PRO-TECH Toruń consultants will select the right welding and cutting tape and prepare a quote.
Product safety information (GPSR)
In accordance with Regulation (EU) 2023/988 of the European Parliament and of the Council (GPSR), the economic operator responsible for this product within the European Union is the importer:
P.H.U.P. PRO-TECHul. Wschodnia 36A, 87-100 Toruń, Polska
VAT ID: 8791059464
tel. +48 56 623 43 78, e-mail: [email protected]
The product must be used as intended and in line with the manufacturer's recommendations. For matters concerning product safety, please contact the importer.
Similar products
Welding wires and tapes




